|
|
|
Wandy:
When logging in with WinBox for the first time use user name
'admin' and no password (hit 'enter' key) All Wandy Stations (except slave configs) are standard
configured with IP number 192.168.0.240 (default gateway on 192.168.0.1 and
random DNS numbers) You will probably have to alter the IP numbers!
For more info please read the documentation below and in the Support menu:
Downloads:
|
RouterOS Latest Package for i386
|
ZIP
|
9,05 Mb
|
Package that allows you to
install RouterOS on a i368 processor board.
|
|
RouterOS Latest Package for Mips
|
ZIP
|
8.60 Mb
|
Package that allows you to
install RouterOS on a Mips processor board.
|
|
RouterOS Latest Package for PPC
|
ZIP
|
9.93 Mb
|
Package that allows you to
install RouterOS on a Power PC board.
|
|
WinBox
|
ZIP
|
24,8 Kb
|
Management & Administration
program (Windows).
|
|
|
|
|
Wandy Clients:
When logging in for the first time use user name
'admin' and no password. All Wandy Stations are standard configured with IP
number 192.168.1.1 You will probably have to alter these IP number!
Normally the Wandy Client is configured as a Client Router (WiFi client to
ethernet port router). This is the only supported modus! The Wandy Client
can be switched to an other modus. Be aware, we do not support any
questions about these other moduses! The Wandy client is developped as a
client. Switching to an other software modus can be done, if you feel you
have enough knowledge of WiFi and networking in general. We can not
possably answer all your questions.
There are 2 ways to switch:
1. Upload one of the config files below.
2. Go to the (hidden) switch-page in the Wandy client;
http://192.168.1.1/opmode.asp
Please reboot after selecting the required mode and continue configuring
the Wandy in the normal configuration pages. Sometimes a fresh restart of
your browser is required. If you encounter "strange" behaviour on
unreachable IP adresses, please flush your Windows ARP-table by entering
"arp -d" on a dos prompt.
Again: if you are not certain and/or do not understand above switching
procedure, do not attempt to switch the Wandy Client. (As told before: The
Wandy Client is a client and not really intended to be anything else.) For
more info please read the documentation below:
Downloads:
|
Wandy 2R Manual
|
PDF
|
1,00 Mb
|
|
Wandy 2R AP mode config file
|
CFG
|
28 Kb
|
|
Wandy 2R Client-Bridge config file
|
CFG
|
28 Kb
|
|
|